Universal 300-868MHz RX MULTI Receiver For TOP432NA TOP432EE TOP432EV TOP 432 NA EE EV Garage Door Remote Control Receiver

Why choose me?
* Aliexpress Sales Champion
* Very good reviews
* Quality assurance
* Quality service
* Shipping in 12 hours
Specifications:
1)Name: Universal receiver 300-900mhz
2)Operating Voltage: AC/DC 9V-30V
3)Channel: 2.
4)Frequency: 300MHz – 900MHz.
5) Distance: 30-50 meters.
6) Very mini size: 5.5cm*4.5cm*1.0cm.
7) One receiver can work with 400 codes.
8) It don’t interference other remotes and receivers.
9) Brand selector: With 8 dip switches user can make different combination for different remote brands.
10)Code: Rolling and Fixed code & Learning code.
11)Uses: Receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment, gateways, lifting devices. This is an easy to use, good looking, low power consumption and is easy to connect to your existing system.
12) Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it’s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.
Compatible Models
TOP432NA
TOP432EE
TOP432EV
Working Frequency : 300MHz-868MHz(Rolling Code & Fixed Code & Learning Code)
300MHz
310MHz
315MHz
318MHz
390MHz
433.4MHz
433MHz
433.92MHz
868MHz
868.3MHz
868.8MHz

Can identify ALL Fixed code (2262, 2260, 2264, 5326, M1E, M5E and so on). All Learning code (1527, 2240, 6P20B, 6P20D and so on), Rolling code (HCS301, HCS300,HCS200, HCS201, HCS100, HCS101),

and many other main brands in the market
Features
* Receive stronger signal
* One receiver can work 400 codes
* Simple operation, better quality and trustworthy.
* It will not interfere with other remotes and receivers
* Compatible with multiple brands of remote controls
Programming a new remote
1) Select the correct brand for remote to be programmed by moving dip switches UP or DOWN. For example 433,92Mhz Marantec remote controls, just move Dip-switch 7 UP.

2) Press the learn button. The will LED turn on.

3) Press the button on the remote, the LED flashes 4 times. It means that remote control was programmed successfully.

4) Repeat step 2 for another button.

5)The 2-nd channel programming procedure is the same.

Erase all data from the memory card: Press and hold either learn button. The LED will start flash. Keep this button pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered
Include
Receiver
Small Antenna
English Manual
Work with 433MHz 1527 learning code remote control
In order to better adapt to our receiver, it is recommended to choose to buy our remote control